Forum Topics Started
-
- Cummins Marine Forum Topics
-
-
overhaul/rebuild of SMX raw water pump
This topic has 1 reply, has 2 voices, and was last updated by 1 year ago
February 12, 2023 at 9:30 am I was given a previously used SMX raw water pump, can I send it to SB Marine for overhaul…?
1 ReplyFebruary 13, 2023 at 7:23 pm Certainly
-
Cummins 6BTA-315-2800 and 6BTA5.9MC common parts
This topic has 5 replies, has 2 voices, and was last updated by 1 year ago
December 5, 2022 at 6:09 pm I have the opportunity to buy parts off of a 2012 6BTA-315 engine, I’m thinking: Turbo Charger, After Cooler, Fuel Pump and Injector Pump, Alternator, Fuel Injectors…etc., Are the parts compatible with the 6BTA5.9 M-3 engine model…?
5 RepliesDecember 12, 2022 at 6:38 pm You decide what all you want to do and how deep you want to look/rebuild.. All is simple other that the Injection pump–When we send out a good working pump like yours to a good shop, it’s real easy to spend $3000- 3500 to have it gone thru / made as new, and “preserved” and shipped back to us.. New they are worth 5000-6500 if you can evenĀ get one.Ā Ā What overall shape was the engine in the parts came from? The aftercoole…
-
ZF 80A oil line swept fitting
This topic has 2 replies, has 2 voices, and was last updated by 3 years ago
March 21, 2021 at 6:04 pm What size fitting do I need for the oil drain lines: SAE 8 flare or SAE 10 flare Thank you
2 RepliesMarch 21, 2021 at 6:14 pm I’m confused and perhaps not asking in a clear manor: What size thread so I need to replace the ZF 80A oil drain plug..? I ordered the oil drain lines from SB Marine late last year, and can’t use the drain line fittings due to the shaft coupler being in the way. What size ZF 90 degree sweep fitting do I need, the SAE 8 Flare or SAE 10 Flare ..? Thank you..
-
ZF 80A & ZF 85A oil temp and pressure sensor locations
This topic has 5 replies, has 3 voices, and was last updated by 3 years ago
September 7, 2020 at 7:01 am Where do I install transmission oil pressure and temp. sensors….?
5 RepliesSeptember 8, 2020 at 10:46 am jfsimpson wrote: Do you sell the adapter hardware needed..? Thank you Follow this link: https://www.sbmar.com/product/zf-adapter-fitting/
-
Installing Reverso 5 valve oil change system
This topic has 1 reply, has 2 voices, and was last updated by 4 years ago
April 27, 2020 at 8:46 am I’m looking for the following: ZF 80A and ZF 85A transmission oil sump plug sizes and fittings for oil drain hose Size of fittings on Cummins 6BTA – M3 (330 HP) oil drain hose (HS-7411) Size of Onan 12.5KW genset oil drain hose fitting US/Metric,tapered,pipe thread….etc.
1 ReplyApril 30, 2020 at 5:20 pm ZF 80-85–Should be 3/4″ NPT like the v-drive versions are Cummins shallow marine Oil pan -Rear outside corners– 9/16-18 TPI o-ring Onan–No clue
-
Faria Synchronizer
This topic has 4 replies, has 4 voices, and was last updated by 6 years ago
July 10, 2017 at 12:00 pm I’ve installed Faria Synchronizers (Catalog #34601, Factory #SY9671) on my Cummins 6BTA-3M powered boat. So far, the synchronizers aren’t working as the needle/indicator jumps and I’ve tried to adjust the synchronizers per the instructions, no help/progress. Are the engines equipped with a magnetic or alternator tach. signal source…? Any idea’s..? Thank you..
4 RepliesAugust 20, 2017 at 4:55 am Thank you very much Tony. You are the Pope of Cummins. ???
-
overhaul/rebuild of SMX raw water pump