Home » Seaboard Marine Store » Hydraulics / Commercial Equipment » PetroWrap® Anti-Corrosion Tape (2 in. x 33 ft.)

PetroWrap® Anti-Corrosion Tape (2 in. x 33 ft.)

$16.00

  • PetroWrap Anti-Corrosion Tape 2″x33′ individually packaged Roll
  • For use in all climates: 20°F to 115°F
  • Use on Valves, steel, fittings, hydraulics, etc
  • Does not harden, dry or crack
  • very high degree of impermeability to water and is unaffected by vibration. It is highly resistant to mineral acids , alkalis, and salts.

Description

The PetroWrap Anti-Corrosion System has been developed for long term protection of metal surfaces that are underground, underwater, or exposed – even in the most severe environments. It consists of a cold applied system of petrolatum-based PetroWrap Anti-Corrosion Tape, PetroWrap Primer, and, where contouring is necessary, PetroWrap Mastic. PetroWrap adheres to surfaces without heating, even on damp and/or indifferently prepared areas.

Application Instructions:

1. Remove all contaminants such as dirt, oil, scale and excessive moisture.
2. Wrap Petrowrap Tape C spirally around prepared surface using even tension. An overlap of 55% is recommended to assure total protection.