Forum Topics Started

Viewing topic 1 (of 1 total)
    • Cummins Marine Forum Topics
    • Dieselview only showing Port data – both smartcra

      This topic has 3 replies, has 2 voices, and was last updated byCorey Schmidt 5 years ago

      February 25, 2019 at 12:29 pm Recently purchased a 2007 40 Sea Ray with Twin QSB 5.9. The Dieselview screen is actually in good shape however it only shows data from the port engine (engine & fuel). All dash gauges work for both engines. I tried cleaning the terminals for the starboard engine where it plugs into the dieselview but no change. I’ve been reading through the forums and from what I gather if this was a problem with the connection at the engine my dash …

      Started by: tomadrian in: Instrumentation & Electronics

      3 Replies
      March 11, 2019 at 3:12 pm I do not think it’s a problem with the display unit but the only way to tell is to have another unit to swap with. You may try swapping the SIM modules on the engines to see if you can get the issue to switch sides? Also check that the MUS ID jumpers are set correctly… there’s an article on our website on how to do this. Welcome to the SmartCraft world…

      Last Post by: Corey Schmidt posted: 5 years ago

  •  

Viewing topic 1 (of 1 total)