Forum Topics Started

Viewing topic 1 (of 1 total)
    • Cummins Marine Forum Topics
    • Propping issues

      This topic has 1 reply, has 2 voices, and was last updated byRob Schepis 4 years ago

      August 24, 2019 at 1:59 pm I have a 2000 Riviera flybridge w/ 6bta 370 hp Cummins. I bought the boat used a couple of years ago. It had been sitting for 2-3years. After survey did complete bottom job. Blasted to gel coat, new paint, thru hulls and props. Emailed Riviera and put the exact spec props that were on the boat. 19 x 23 cupped. After cleaning aftercoolers, heat exchangers all filters. Installing your ccv system, stopping boost leaks etc I am still having some iss…

      Started by: Garry Lightfoot in: General Discussion

      1 Reply
      August 24, 2019 at 6:01 pm 3,400 no load for that engine is good but you were previously 800 rpm short on no load? Loaded they need to see ~3,150. Get your overheat issue squared away first before you do damage with more WOT sea trials.

      Last Post by: Rob Schepis posted: 4 years ago

  •  

Viewing topic 1 (of 1 total)