- This topic has 1 reply, 2 voices, and was last updated 4 years ago by .
-
Topic
-
Good morning guys. I have a Sea Ray 420 Sundancer with 6CTA 8.3-M3. I hit a log and got some vibration in the port prop. Pulled the boat and took both props in for scanning and repair. Prior to the log my max rpm is 2,650. I cruise at 2,150 and gps says speed is 23.5 knots.
Props are 22×24…both were out and after scanning pitch calculated out at a little over 24. Now that they were both brought back to 24 my max rpm is still 2,650 and cruising at 2,150 I am down to 21.7knots… Before and after prop scans are attached if that helps
Question is does the engines have a limiter at 2,650rpm and should I tweak these props a bit for speed and or max rpm?
Thanks
Viewing 1 replies (of 1 total)
Viewing 1 replies (of 1 total)
You must be logged in to reply to this topic.