Topics Engaged In
Viewing topic 1 (of 1 total)
-
- Cummins Marine Forum Topics
-
-
QSB 5.9 – LOW OIL PRESURE SMARTCRAFT
This topic has 20 replies, has 7 voices, and was last updated by 3 years ago
May 20, 2018 at 9:48 am Dear all, I investigate to find why my smart craft indicate suddenly “low oil pressure”… 2 mains informations are strange in the screen: – Oil pressure could be O (idle) or max 68.9 at 800 rpm – Oil temp still always at (-273Ā°) (seems locked) Before starting the second engine (good one), oil PSI is 0.5. So i tested this operational sensor on failed engine but no way (oil press still 0). In second time, i tried to fi…
20 RepliesApril 6, 2021 at 5:48 am This is incredibly useful, thank you. Iāve had this issue for over a year. Iām wondering if I can reflash the ecm without a Cummings engineer. Being in the UK they are few and far between. I have managed to read the ecm using a J1939 compatible scanner but have been unable to clear the low oil pressure error. I guess if I could find the correct diagnostic software loaded on a laptop a Cummings engineer could connect remotely using something like…
-
QSB 5.9 – LOW OIL PRESURE SMARTCRAFT
Viewing topic 1 (of 1 total)