Forum Topics Started
Viewing topic 1 (of 1 total)
-
- Cummins Marine Forum Topics
-
-
Not getting RPM at WOT
1
2
This topic has 38 replies, has 5 voices, and was last updated by 6 years ago
May 6, 2017 at 8:58 am Ā Hi everyone. Here are some details: 6BT 210’s pushing a 33 foot Riviera Props freshly tuned by wilmington 2800 hours well maintained and not abused. I can easily get 2700 RPM ++ in neutral at the dock with no smoke. Underway I make 2400 and 2500 (Port/Star) with no smoke. Racors are fresh and clean. Ā Am I overproppedĀ or am I overlooking the obvious? Ā Thanks all.
38 RepliesDecember 31, 2017 at 7:17 am Steve, Your propping / engine load at 2600-ish is really good–Your are “by the book” with a QSB 5.9 380 meaning you have lots of reserve if you add some weight or want to run at 2800-2900 for an hour or two .. It’s good to check WOT numbers for a minute or two each time the weather presents the opportunity on your trips.. Keep your aftercooler on a 2 yr max service cycle unless you fresh water flush– then you ca…
-
Not getting RPM at WOT
1
2
Viewing topic 1 (of 1 total)