Forum Topics Started
-
- Cummins Marine Forum Topics
-
-
nmea2000 gateway for a QSM11
This topic has 2 replies, has 3 voices, and was last updated by 6 months ago
November 27, 2019 at 6:10 am Hi Corey, We have a customer with a QSM11 and dieselview displays my question your Mercury gateway works on this setup?, and do we need any harness adapter o other type of cable? Thank you very much, Felix Alvarez Navis Electronics Inc.
2 RepliesOctober 10, 2023 at 3:54 pm Hi, is this gateway usable with qsm11 engines?Ā The description states that it is not compatible with OEM version of qsm11.
-
Vessel view 403 upgrade kit for 2 QSM11
This topic has 1 reply, has 2 voices, and was last updated by 4 years ago
December 13, 2019 at 5:02 pm Hi Corey, We have a customer who has 2 QSM11 engines with Dieselviews displays we want to use the vesselview 403 upgrade kit. my question: do we need 2 displays?, one for each engine?, i think so because both engines are independent thank you very much, Felix Alvarez Navis Electronics Inc.
1 ReplyDecember 14, 2019 at 10:48 am Felix, yes in this case you will need one display kit per engine. The swap out should be pretty straight forward…
-
Upgrade from DieselView to VesselView4
This topic has 2 replies, has 2 voices, and was last updated by 7 years ago
January 12, 2017 at 3:44 pm Hi, We did the upgrade fromĀ DieselView to VesselView4 on this Cummins QSB5.9 with the upgrade kit that you sell. everything is working OK, all information shows OK, we connected display to Garmin chartplotter and transfer information OK. but.. i get this error from time to time on VesselView display: Warning: SIM no J39 Data CNTR Engine any ideas?, what’s causing the problem. Thank you very much, Felix Alvarez Navis Electronics Inc.
2 RepliesJanuary 12, 2017 at 5:27 pm <p>Yes, it’s compatible according the chart</p> <p>SIM: 4929301 Rev 5</p> <p> </p> <p>Thank you Corey</p>
-
nmea2000 gateway for a QSM11