Forum Topics Started

Viewing 2 topics - 1 through 2 (of 2 total)
    • Cummins Marine Forum Topics
    • 6CTA 480 Sea Trial Feedback Needed

      This topic has 8 replies, has 5 voices, and was last updated byWilliam Walter 3 years ago

      June 10, 2020 at 6:39 am I am in the process of purchasing a 2003 Sea Ray 460 Sundancer, I just had the sea trial with a certified Cummins mechanic on board who had the computers hooked up to provide accurate readings during the 2-hour trip. Boat was loaded with full fuel, half water tanks, and 5 people on board, not much gear as the owner had already taken out most of his possessions. I am including the results (PDF File) based on these readings. The broker indicated …

      Started by: Louis A Rey in: Cummins Marine Engines

      8 Replies
      June 13, 2020 at 6:35 am Sorry to jump on the thread with a question but also having a 480 ce Iā€™m always interested in looking at other peoples numbers.when I saw the boost numbers in the low 20s at 2300 rpms I realized thatā€™s way below my operating numbers.I realize different boats with same engine get some variation in numbers but as I usually run at 2100 rpm and see a boost of 37 or 38 on the gauges so those numbers jumped out at me.Any insight into this would be app…

      Last Post by: William Walter posted: 3 years ago

    • Smart Craft Information

      This topic has 2 replies, has 3 voices, and was last updated byCorey Schmidt 4 years ago

      February 28, 2020 at 3:17 pm I am purchasing a 2002 Sea Ray with 6CTA 450 engines and this year did not come with the Smart craft electronic read out. The boat has new Garmin NMEA 2000 Displayā€™s is there a way to get the information from these engines to display on the Display.

      Started by: Louis A Rey in: Cummins Marine Engines

      2 Replies
      February 29, 2020 at 7:14 am Louis, only option from Seaboard to get the info from mechanical engines into the NMEA network in a 100% plug n play way is to utilize our SMX DigitalView digital display platform… you can read more on the product page: SMX DigitalView Mechanical Engine Digital Display Kit This will allow you to both read the engine data, manage the engine alarms, and re-broadcast all of the engine and optional parameter data to your NMEA Garmin devices.

      Last Post by: Corey Schmidt posted: 4 years ago

  •  

Viewing 2 topics - 1 through 2 (of 2 total)