Favorite Forum Topics
Viewing topic 1 (of 1 total)
-
- Cummins Marine Forum Topics
-
-
Converting 6B5.9M from 12 to 24 volts
This topic has 11 replies, has 4 voices, and was last updated by 5 years ago
December 18, 2018 at 3:40 am My 6B5.9M was manufactured in 1994 but installed new in 2004 in my sailboat. I’m now converting my electrical system to 24volts and was originally planning to just swap out the alternator and leave the rest of the relatively simple engine electrical systems at 12V. However, as it turns out only a few electronics items need 12V and a simple DCDC converter can handle them nicely. In many ways it would be simpler to convert all to 24V, but h…
11 RepliesFebruary 19, 2019 at 2:05 am I am still battling with a dual voltage system and have not decided where I land. My latest thought is this. What about using a 24V alternator and starter motor with but keep the 12V panel and starter solenoid? I already must provide low current 12v loads for NMEA2000 and etc. It is then easy to power the panel with that system. This means I can have a 24V start and house batteries and this greatly simplifies charging and redundancy, etc. The 12…
-
Converting 6B5.9M from 12 to 24 volts
Viewing topic 1 (of 1 total)