• Creator
    Topic
  • #12274

    Jerry Bradley
    Participant
    Vessel Name: E-Fish-N-Sea
    Engines: 2004 270 6B
    Location: Somers Point NJ
    Country: USA

    Hi all

    I’m looking for the location of the oil pressure alarm switch or sender on a 2002 6 CTA not For the gauge but the alarm

Viewing 2 replies - 1 through 2 (of 2 total)
  • Author
    Replies
  • #12320

    Jerry Bradley
    Participant
    Vessel Name: E-Fish-N-Sea
    Engines: 2004 270 6B
    Location: Somers Point NJ
    Country: USA

    Thank You

    #12277

    Tony Athens
    Moderator
    Vessel Name: Local Banks
    Engines: QSB 6.7 550 HP
    Location: Oxnard, CA
    Country: USA

    Look at the attached pictures–

     

    On the port side of your engine (injection pump, you have a main oil gallery– 4 or 5 Ā 1/8″ NPT pipe plugs in a row–any one can be used if you can get to it–You could also “T” off one, but only use 1/8″ Hyd Steel type fittings–No cheesy brass allowed

    On the oil filter side, you have 2 ports on the filter head casting..

    Hope this helps. Ā Tony

     

     

    Oil Pressure Ports--6CTA 8.3-C (3)

     

    Oil Pressure Ports--6CTA 8.3-C (2)

    Oil Pressure Ports--6CTA 8.3-C (1)

     

    Tony

Viewing 2 replies - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.