Forum Topics Started

Viewing topic 1 (of 1 total)
    • Cummins Marine Forum Topics
    • Cold climate starting

      This topic has 4 replies, has 4 voices, and was last updated byKraig Kilger 4 years ago

      September 24, 2019 at 1:30 pm This is a well weathered topic, Iā€™ve been reading the many threads regarding cold starts and hope the members can help me with some alternative ideas. First Iā€™ve got a pair of 6BTAā€™s 370 hp 2003 vintage with just over 3000 hours on each, pre-heat system disabled by the previous owner and block heaters installed. The block heaters work great when the boat is in the slip but I live on an island and have it on a mooring buoy 90% of the time. After…

      Started by: Joe in: Cummins Marine Engines

      4 Replies
      January 7, 2020 at 3:20 pm I installed 250w Wolverines low on the side of the oil pan of my QSC’s, and I used a Dremel with flap wheel sander to make quick work of the paint. If you have shore power there is no reason not do use these as they do a great job of keeping your ER dry and free of rust with relatively low power usage.

      Last Post by: Kraig Kilger posted: 4 years ago

  •  

Viewing topic 1 (of 1 total)