qsc fuel actuator valve

[bret]

hi guys

qsc fuel actuator valve

is this the same as the qsb one you have for sale?

boat broke down would only fire once on crank then nothing until key was cycled

unplugging of actuator would let the engine start but with these fault codes

Topic

[Tony Athens]

Thanks for the “final solution”…………….Glad you got it all worked out..

Tony

[bret]

final solution of issue

hi guys

sorry for no follow up i have been overseas for 6 months and then corona iso

replacing the fuel actuator valve did not solve problem – however swapping the ecm’s did

so when you see every one of your injectors fault at once, pretty good chance its going to be ecm

cummins service guys said they had never seen one go like that – but there you go

[Rob Schepis]

Fireisland1 wrote:

Thanks Bret. do you know is it a mechanical device or a sensor?

It’s electronic, the ECM talks to the FCA to regulate the needed fuel to the HP pump.

[Fireisland1]

Thanks Bret. do you know is it a mechanical device or a sensor?

[bret]

I’m sure there are more qualified than myself to answer

but what the actuator does is regulates the amount of fuel allowed into the high pressure pump from the lift pump

so if it stays shut then no fuel gets into the hp pump which pressurizes the common rail – so no start

[bret]

thank you so much David

And to everyone else who helped out too

i wasn’t aware of quickserve online what a great resource

cheers

bret

[David Amble]

Part # 4903523

I also have 2011 build QSC600 engines and looked up QSOL with my engine number/s (which start with a 7) and found the following part number for the electronic fuel actuator valve as 4903523.
I am on the Gold Coast and get great service and support from Cummins Carole Park Brisbane. If you are stuck, try them. They are open weekdays until midnight and Saturday mornings.

1 user thanked author for this post.

bret

[Fireisland1]

What does the fuel actuator do?

[Luke Nelson]

Not off hand sorry, needs another 45min on quickserve.
Due to the time of the week. I would say order from Tony, ship today and it will be at your door by Tuesday I would think? You wont get much better in Aust before Tues?

[bret]

thanks luke

can you remember the part number ?

when i ring cummins south pac they ask for a part number

cheers

bret

[Luke Nelson]

Cummins in Aust will have one. I got one next day in WA from the East coast. Cost more than from Tony but I wanted it faster than a 4 days across the world.

[bret]

thanks rob

i have done that and awaiting reply

cheers

bret

[Rob Schepis]

You misunderstood me — The engines came up on QSOL no problem, but the part number for the FCA was not provided, at least not that I could find. Email Kevin.

[bret]

boat is in australia – maybe why it doesnt show ?

2011 qsc 600hp

Motor Details

2011 600.0 h.p. CUMMINS INBOARD 46909941
2011 600.0 h.p. CUMMINS INBOARD 46909942

cheers

bret

[Rob Schepis]

I was on QSOL last night with the engine serial number and no luck. Yes contact Kevin.

[Tony Athens]

Send a detailed note to: [email protected]

He is my parts guru..

Tony

[bret]

serial number is 46909941

cheers

bret

[Tony Athens]

You need one you the QSC………….Post a serial number to be sure

Tony

[Author]

Replies