Cummins Marine Diesel Repower Specialists › Forums › Cummins Marine Engines › hydraulic pump on a cummins qsb
- This topic has 11 replies, 2 voices, and was last updated 2 years ago by Tony Athens.
-
CreatorTopic
-
June 11, 2021 at 2:34 pm #116275
rod robbinsParticipantVessel Name: intrepid
Engines: cummins 355 QSB 6.7L
Location: seattle
Country: usa
I have a 6.9 qsb with a zF63a gear box. I am looking into installing stabilizers and am looking for suggestions on connecting the pump. It looks like it may need to be shaft driven but have been unable to find information.
Ideas?
Thanks -
CreatorTopic
-
AuthorReplies
-
November 1, 2021 at 6:16 pm #122521
Tony AthensModeratorVessel Name: Local Banks
Engines: QSB 6.7 550 HP
Location: Oxnard, CA
Country: USA
Rob,
Thanks for posting this pics, common Vicker V-10 seems to fit well on a 6.7 and the ports are accessible..
You saved us all a lot of time.This looks like a standard 6.7 not the SL model, correct?
If not sure, post a serial number or get back a few feet and post a pic of the engine side of the engine ( actually better for me) .
Tony
October 31, 2021 at 9:52 pm #122492
rod robbinsParticipantVessel Name: intrepid
Engines: cummins 355 QSB 6.7L
Location: seattle
Country: usa
vickers pump
Just an update for future info. The vickers pump fit with plenty of clearance for anyone contemplating this exercise. side ports for even more flexibility.
1 user thanked author for this post.
June 18, 2021 at 9:19 pm #116663
rod robbinsParticipantVessel Name: intrepid
Engines: cummins 355 QSB 6.7L
Location: seattle
Country: usa
engine supplier
The engine is in a new north pacific NP45 so i am not sure who supplies them with there engines. We only have 380 hours on it so far. I have had hatton marine out at the boat checking on some noise so i would say they are who i would call for any work.
June 18, 2021 at 8:08 pm #116660
Tony AthensModeratorVessel Name: Local Banks
Engines: QSB 6.7 550 HP
Location: Oxnard, CA
Country: USA
Here are a couple of pages from the 6.7 MAB referencing you inquiry.. Who is your supporting dealer distributor? Where did the engine come from?
Tony
June 18, 2021 at 6:23 pm #116657
rod robbinsParticipantVessel Name: intrepid
Engines: cummins 355 QSB 6.7L
Location: seattle
Country: usa
do you know the rotation
The manufacture ask me the rotation and rpm vs the crank shaft. Do you have this information?
June 17, 2021 at 10:42 pm #116625
rod robbinsParticipantVessel Name: intrepid
Engines: cummins 355 QSB 6.7L
Location: seattle
Country: usa
does anyone know the rpm and rotation of the pto adapter?
ThanksJune 14, 2021 at 8:36 pm #116454
rod robbinsParticipantVessel Name: intrepid
Engines: cummins 355 QSB 6.7L
Location: seattle
Country: usa
thanks tony
Do you know if the pto rpm matches the crankshaft rpm?
June 14, 2021 at 8:34 pm #116453
rod robbinsParticipantVessel Name: intrepid
Engines: cummins 355 QSB 6.7L
Location: seattle
Country: usa
Thanks tony. Do you know if the PTO rpm matches engine speed or is it a fraction of the rpm?
June 12, 2021 at 7:34 am #116298
Tony AthensModeratorVessel Name: Local Banks
Engines: QSB 6.7 550 HP
Location: Oxnard, CA
Country: USA
The 6.7 does have a provision for a SAE A live PTO Adding the PTO pad is straight FWD….We stock them.. Finding a HYP PUMP what will physically fit on the pad and then will then allow you to hook up lines to is will be a challenge.
1 user thanked author for this post.
June 11, 2021 at 6:39 pm #116284
rod robbinsParticipantVessel Name: intrepid
Engines: cummins 355 QSB 6.7L
Location: seattle
Country: usa
cummins
I made several errors in my post. I shouldn’t do things by memory. I have a 355hp QSB 6.7 and a ZF85a gearbox. The boat is a single engine 2019 north pacific NP45. The stabilizers i have been looking at are Kobelt 7.5. I will be at the boat tomorrow and can get a photo. I was talking to a fellow np owner and he indicated there was a provision for an SAE-a pto pad but i am not sure. Another friend did a install and made a custom mount to couple the pump the the front of the vibration dampner.
June 11, 2021 at 6:15 pm #116282
Tony AthensModeratorVessel Name: Local Banks
Engines: QSB 6.7 550 HP
Location: Oxnard, CA
Country: USA
#1–tell me about the boat———————– everything Post l]pics of the engine as installed in the boat
#2—–What exact “stabilizers” caught your eye?
-
AuthorReplies
You must be logged in to reply to this topic.