Deck drains

[Dan]

Hi all,

Odd topic for here but I thought I would throw it out there in case someone can point me in the right direction.

I am looking for some stainless (316) 90 degree deck drains to suit a 2′ hose, they need to look something like this (preferably with a wider top flange) All I can find with google is 1 to 1.5′ hose barb.

Any help appreciated,

Dan

Topic

[Dan]

I found a couple of solutions, these would have been perfect, made by gemlux but no longer produced,I need six and can only find two.

https://www.greatlakesskipper.com/gemlux-2-inch-stainless-steel-boat-floor-drain-w-strainer

Southco made a great scupper with a non return ball, but is no longer in production,I found a company that must have purchased old southco stock- page 37 of their catalog, unfortunately it is physically to big to install in my boat.

http://www.marinehardware.com

Also available here
https://www.ebay.com/itm/382410222955?ul_noapp=true

These are the scuppers I found,still waiting on more info,all I have so far is that they are a two inch barb.

[Tony Athens]

Post some pics and where from?

Tony

[Rob Schepis]

Dan wrote:

I was going down that road of getting some made but have since found some that look exactly like what I need.

Locally or online ?

[Dan]

Tony Athens wrote:

You are most likely looking at a 100% custom fitting…
Tony

I was going down that road of getting some made but have since found some that look exactly like what I need.

[Tony Athens]

You are most likely looking at a 100% custom fitting…………………….Very doable, but you need the budget that meets the dimensions of a sketch that you will have to supply………Or, you need to compromise and buy an “off the shelf part” and adapt..

Tony

[Author]

Replies