6cta bus heater install

[Chris]

I am installing a bus heater off one of my 6ctas. I originally wanted to run it off my generator but northern lights did not recommend that. I saw the post with the ports on top the manifold and return just below the alternator. The heater will be going in the main cabin above so there will be a couple feet of hose. Do I need to install a bleeder valve at the heater to remove the air or can I bleed through the one at the heat exchanger? Thanks

Topic

[Chris]

Can I use this port near the starter? The one under the alternator is already being used, it goes to the water filter.

[Author]

Replies