Forum Topics Started

Viewing 2 topics - 1 through 2 (of 2 total)
    • Cummins Marine Forum Topics
    • 480 CE Boost and Exhaust guages

      This topic has 7 replies, has 4 voices, and was last updated bychuck young 1 year ago

      September 27, 2019 at 4:55 am I have a 2005 Searay 390 MY with a pair of 480 CEs, 370 hrs. The Smartcraft display is in good condition however it dosent display boost or exhaust temp readings. I seem to recall reading that there are sensors for these on board the engines but readings can not be displayed on the Smartcrap. I think I recall reading that they can be read with the right diagnostic software. My question is this… can I install guages that will display these …

      Started by: chuck young in: Cummins Marine Engines

      7 Replies
      July 27, 2022 at 7:01 am Matt I never got any gateway. That is beyond my ability. I only get engine data on my failing Smartcrap System View. For Boost and X temp I bought Seaboards Turbocator package. Easy to install and independent from other systems. I wish I could display other data on my Ray displays. I understand I could do new harnesses and buy Seabord data displays but thatā€™s a tough job and the displays are too small. 480 CEs Ā are fine, but language challenged.…

      Last Post by: chuck young posted: 1 year ago

    • Searay 40 temporary loss of guage data, syncronizer affected

      This topic has 10 replies, has 4 voices, and was last updated byCorey Schmidt 6 years ago

      June 29, 2017 at 4:39 pm Tony and Corey or others, Thanks again for the help last year advising me to install the Cummins adapter harness which eliminated those ghost error codes. By the way, Boatdiesel would not post my thank you to you guys several months ago. Here is a new problem I hope you or someone else on the forum can help with. First my boat: 2006 Searay 40 dancer. Twin cummins qsb 380 5.9. Ser.46524871 and 46525394. Vessel view software ver.4.0.0.20. Yesterd…

      Started by: chuck young in: Instrumentation & Electronics

      10 Replies
      July 15, 2017 at 6:56 am The SmartCraft gremlin never sleeps but you can keep him at bay with a clean and dry engine room, good tight & greased harness connections, and a little good luck on your side…

      Last Post by: Corey Schmidt posted: 6 years ago

  •  

Viewing 2 topics - 1 through 2 (of 2 total)