Forum Topics Started
-
- Cummins Marine Forum Topics
-
-
Expansion Tank Cap P/N
This topic has 1 reply, has 2 voices, and was last updated by4 years ago
June 18, 2019 at 3:28 pm Hi folks Cleaning recovery tanks for 6bta and want to replace expansion tank caps. Looking Stant P/N for the caps? Mine are different brands and models AC Delco RC33 cap on port Unknown brand model A170241 cap starboard Both are 15psi Thanks!
1 ReplyJune 18, 2019 at 3:53 pm Hi Nestor, Cummins P/N: 5304925 https://www.sbmar.com/product/cummins-marine-coolant-fill-cap/ Thanks, Kevin
-
Thermostat Full Open Question
This topic has 3 replies, has 3 voices, and was last updated by 5 years ago
November 12, 2018 at 6:06 pm Newby to Cummins diesel and this forum. Recently replaced tstat on 5.9 Cummins using OEM 3802968. In addition completed flush on both directions, replace raw water pump and removed aftercooler for maintenance following Tonyās tips. Motors run at 195F tested up to 2800RPM. I read on the web this thermostat begin open at 181 and full at 203F. Is that a correct statement? If correct should 195F safe on these motors.? I still need to confirm …
3 RepliesNovember 13, 2018 at 11:24 am Nestor wrote: Iām doing all required maintenance first before switch on tsat. Good plan.
-
Expansion Tank Cap P/N