Forum Replies Created
-
AuthorReplies
-
September 4, 2018 at 5:27 am #36729
a_schmittParticipantI wish I could help. That code cleared itself. It never affected performance or shut me down. There was no changes made before or after the code disappeared. Sorry I canāt be more help, was just glad the problem disappeared.
February 15, 2018 at 6:29 am #28223
a_schmittParticipantCorey, Thank you for any assistance.
Boat was re-powered into 2011, serial number 6042ā1801.
There were no changes that I can think of that wouldāve triggered this code.January 26, 2018 at 3:39 am #27541
a_schmittParticipantWell Iām a little embarrassed, at least I donāt have a gear problem. I discovered that this boat has two different transmission controllers. The starboard gear has a EB 30 controller, port has the EB 31 controller.
The low pressure on the starboard gear led me to believe that I had a transmission problem.
The EB 30 controller does not show full operating pressure until put in gear and given some rpm.
The EB 31 controller shows full operating pressure whenever the engine is running.
Obviously this explains why I have no performance issues and two different pressures at idle.
I was having dock work done and couldnāt move the boat. I was trying to sort out without a test run.
Well at least I learned a lot about these gears and there controllers. Hopefully knowledge I wonāt need in the future.
Thank you Tony and Corey for your help on this. -
AuthorReplies