QSC 8.3 not starting

[Charles Heldewier-Vignon]

I have a trouble with one of my QSC’s 8.3L (twin engine), it does not want to start. I have changed the lift/prime pump , swapped sensors from the good engine and still nothing , including the actuator.Changed filters and checked fuses. I get these faults :Fuel Level1 high input and 559 low fuel pressure (after cranking for a while), I have had one about cilinder imbalance etc etc.And for a while about 2 years LOW EMC Voltage but it never gave me problems. I hope some one could help me out here  I run a charter fishing and already down 2 weeks.

1 user thanked author for this post.

ROB SLUSSER

Topic

[Corey Schmidt]

Active Faults…

I would like to see a complete list of your active faults with the fault code, etc. Also, please include your engine serial numbers and of course, some pictures of your engines from all around.

[Author]

Replies