Reply To: Fresh water flush kit for Salt Water?

[Dan]

Fernando,
As others have said it’s easy to make the kit, I used this stainless steel manifold that is plumbed to the genset, both motors, air con and salt water wash down pumps.
The garden hose attaches to an on deck fitting and all the connections to the groco intakes are as described above.
Not a lot of money spent for a huge benefit, last week I changed an impeller in my genset, I had to take off the end cap of the heat exchanger to chase down all the broken impeller pieces, the inside of the heat exchanger was perfect, no corrosion or scale.

http://www.homedepot.com/p/HOME-FLEX-1-in-x-1-in-x-3-4-in-CSST-Stainless-Steel-FIPT-Manifold-11-100704/204767413?cm_mmc=Shopping%7CTHD%7CG%7C0%7CG-BASE-PLA-D26P-Plumbing%7C&gclid=EAIaIQobChMIlqOVwKeE1QIVgiWBCh1eeg3EEAQYAiABEgIGU_D_BwE&gclsrc=aw.ds

1 user thanked author for this post.

FERNANDO DACOSTA