Forum Topics Started
-
- Cummins Marine Forum Topics
-
-
Smartcraft Gateway problem
This topic has 4 replies, has 2 voices, and was last updated by 3 years ago
November 9, 2020 at 8:49 am Hi everyone I have a 2006 391, I replace the old Northstar 6000 with a Garmin GPS, I bought the Mercury Gateway and installed on the junction box and on the network and I can see the info of both engines on the Garmin and the tachs are working. But if I take out the old northstar gateway from the juntion box my tachs start acting weird and then lost engine comm message apears ob the LCD screen. Anyone has had this situation when replacing the G…
4 RepliesNovember 11, 2020 at 4:30 pm Hi Corey I bought it from a local Cummins Authorized dealer But even without it installed the gauges do the same
-
Gauges acting weird after a Tech Visit
This topic has 6 replies, has 2 voices, and was last updated by 4 years ago
November 4, 2019 at 5:03 pm Hi I have a 2006 Meridian 391 with QSB 5.9 engines, I bought the boat after hurricane Maria and the boat did not sank but it got water on the Port engine. We remove the engine for a complete rebuilt. We got the starboard engine running and everything is ok with it. The reading on the flying bridge gauges were ok. After the starboard engine was Installed, we has trouble to get the engine running. I call a tech and it came over to check…
6 RepliesNovember 18, 2019 at 5:23 am This weekend I solved the problem of my gauges, when the Tech came he change the cables from one engine to the other (not the medusa) I notice some difference on the small plug that goes at the lower front side of the computer one has two cables the other one has three. I exchange the cables all the system became to live the way it should be, the starboard now energize the gauges.
-
Smartcraft Gateway problem