6bta SMX Pump Install, take 2

[JimmyK]

1. When reassembling motor mount bracket, how do you make sure the bracket goes on the engine in the same exact place/orientation? Is the fit between the bracket and bolts tight enough that you don’t have to worry? Or should I scribe a line around the bracket and align it by eye? Or does the motor need to be realigned? Or am I overthinking it?

2. What torque should I tighten the top motor mount bolt to after putting everything back together?

Thank You

Topic

[Rob Schepis]

1. Should end up back as it was before but you can trace it if you want a visual. Best to check alignment, and keep those coupler bolts serviceable and secure.

2. Top bolt? You mean the upper nut on the stud. Greased & Tight! These strike wrenches are the best.

[Author]

Replies