Smart Craft 2007

[DELLA GATTA MASSIMO]

I have two Cummins engines 5.9 of 2007 with a SmrtCraft each.
I should reprogram the SmartCraft of the right engine as it also displays data from the left engine.
How can I proceed since this type of programming can not be accessed from the normal menu?
Thank you

Topic

[Roger Hind]

I too have a diesel view display

My dieselview is on a 2005 QSC 8.3 -540HO SN 46406617 I am assuming it is the smartcraft 2.2 version based on the response from Cummins and Mercury
I have a little burn mark on the right side of the display and in full light display can be difficult to read.
Do you know if there is a wiring diagram for this display particularly for the data inputs to the display?
What is the language used for the data is it all nmea 183?
Thanks for any info.

[Tony Athens]

Let me see if can get my “Digital Guru”, Corey, to jump in here.. You have the earliest of the Cummins-Mercury displays and software and I’m thinking that you will not be able to sort out the glitches …

Give him a day or so..

Tony

[DELLA GATTA MASSIMO]

Hi Tony,
any news for me?
Tanks

[DELLA GATTA MASSIMO]

Good morning Tony,
1) ok
2) ok
3) the only synchronisation possible are the throttle by switch
4) The serial numbers of the engines are :
46711183 and 46711196 of the year 2007.
I’m-considering also the possibility to change the smart craft with news struments because are really old and the engines are perfect with 1600 hours.
Thanks

[Tony Athens]

1) You have ONE DISPLAY per engine, correct?

2) Did it ever work correctly——Post display = Port engine………. Starboard display = Starboard engine?

3) Do you have any type of engine synchronization?

4) I need to “see” your engine controls to ID the type

5) I need those engine serial numbers?

Five questions– I need 5 proper responses, to even come close to helping you..

This are very old engines as you have “Diesel View” from 2004-2005-ish and never had great support..

Tony

[DELLA GATTA MASSIMO]

Gm Tony, is it clear now. Tanks

DELLA GATTA MASSIMO wrote:

I have two Cummins engines 5.9 of 2007 with a SmrtCraft each.

I should reprogram the SmartCraft of the right engine as it also displays data from the left engine.

How can I proceed since this type of programming can not be accessed from the normal menu?

Thank you

[Tony Athens]

Need a real good picture of your current displays so we can ID what you have.. Need an engine serial # to ID your electronics version…………………… SmartCraft is not just 1+1=2 .. It’s 1+1 = ??????????? most of the time

Tony

[Author]

Replies