- This topic has 2 replies, 2 voices, and was last updated 6 years ago by .
-
Topic
-
I have a 30′ Egret with a straight shaft Yanmar 6LP 315 HP. The prop is 20X24 three blade. The dry weight on the boat is 5,000 LBS, fuel capacity is 210 Gallons and the bait well is 100 Gallons. The boat at half fuel and full bait well turns 4000 to 4100 RPM. We run the boat at 3000 RPM. We recently added an SMX Pyro Gauge. The prove is in the dry riser about 2 inches from the turbo exit flange. The temperature is constant 670 at cruise. Our Yanmar mechanic feels that this temperature is indicating there is not enough load on the engine. I would like to know your opinion.
Thank you
Viewing 2 replies - 1 through 2 (of 2 total)
Viewing 2 replies - 1 through 2 (of 2 total)
You must be logged in to reply to this topic.