• Creator
    Topic
  • #30759

    Sean Connolly
    Participant
    Vessel Name: Lost Summer 4
    Engines: 1999 Cummins 6bta 370hp
    Location: East Patchogue NY
    Country: United States

    Hello everybody, so i start install my remote oil filter on my port motor today and i have a clearance problem. The problem is my fuel filter on the port motor is located on the same side as the oil filter with the fuel lines running across where the new remote oil filter will sit I would like to relocate my fuel filter to the other side of the motor as shown in the pictures that Tony has on this site of the fuel line locations I’ve been searching catalogs for the bracket part number to do this to no avail if anyone should have any idea on what the part number is for that bracket it would be greatly appreciated if they pass that information on I will include pictures tomorrow thanks

Viewing 8 replies - 1 through 8 (of 8 total)
  • Author
    Replies
  • #31163

    paul greenhalgh
    Participant
    Vessel Name: Aquabelle
    Engines: 6BTA5.9 M3 370

    Thanks Sean. I’ll send you a private msg.

    #31142

    Sean Connolly
    Participant
    Vessel Name: Lost Summer 4
    Engines: 1999 Cummins 6bta 370hp
    Location: East Patchogue NY
    Country: United States

    So Paul, what are going to do, have one made, I made one myself after finding the cheap one I could get was 220.00 , I can send you a template if you need.

    #30993

    Paul Greenhalgh
    Participant
    Vessel Name: ADELAIDE
    Engines: QSB6.7 480
    Location: Sydney
    Country: AUSTRALIA

    Available here but not cheap: https://www.dieselpartsdirect.com/3897513

    Getting one made locally if you have one available from the other engine might be cheaper. I have the same issue….fuel filter on my Stb engine is fitted to Stb side, making for awkward access. The oil filter is next to it so I need to fix both issues. At least a remote mounting kit is available for the oil filter.

    #30925

    Guy Schoonmaker
    Participant
    Vessel Name: Grand Slam
    Engines: 330 Diamond 5.9's
    Location: Edmonds Wa
    Country: USA

    Cummins Fuel Bracket

    The Cummins # is 3897513, unfortunately they do not have them available and don’t seem to want to give a release date.
    I did the same filter location change on my port 330, had the bracket fabricated locally, pretty straight forward.

    2 users thanked author for this post.
    #30784

    Sean Connolly
    Participant
    Vessel Name: Lost Summer 4
    Engines: 1999 Cummins 6bta 370hp
    Location: East Patchogue NY
    Country: United States

    Sorry here is the picture

    #30783

    Sean Connolly
    Participant
    Vessel Name: Lost Summer 4
    Engines: 1999 Cummins 6bta 370hp
    Location: East Patchogue NY
    Country: United States

    This is the setup on the starboard motor

    #30778

    Sean Connolly
    Participant
    Vessel Name: Lost Summer 4
    Engines: 1999 Cummins 6bta 370hp
    Location: East Patchogue NY
    Country: United States

    This is bracket im lookin for

    #30760

    Sean Connolly
    Participant
    Vessel Name: Lost Summer 4
    Engines: 1999 Cummins 6bta 370hp
    Location: East Patchogue NY
    Country: United States

    These are 6bta 370 horsepower Diamond Series Cummins

Viewing 8 replies - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.