4LH raw water pump removal

[David Wesner]

Engine is a 4LH-DTE. Trying to remove the raw water pump and it won’t come. Am I missing something, I removed the supply hose, two nuts and two bolts. It wiggles, but won’t come. I tapped it with a piece of wood and a hammer, but I am hesitant to go much more than light taps.

Also, I believe there are two o rings that seal this back up. one for the front gear case and the other for the discharge tube. Are they reusable? or is it best to replace (i probably know the answer to this). Any tricks or things to watch out for is appreciated.

Thx

D

Topic

[Tony Athens]

Look at the attached picture——-There are 4 of these bolts hold you pump in place, the rest should be obvious…….Yes, Yanmar did not make it easy..

Tony

 

 

[Author]

Replies