 |
 |
 |
| |
 |
 |
 |
| |
| Marine Products |
| Wolverine
Block Heaters |
|
|
|
 |
|
 |
|
|
 |
| "The Engine Savers" |
| Easier Starting
& Less Engine Wear |
| Now you can Eliminate Cold Starts
and close to 90% of White Smoke. |
|
Attach Wolverine to your oil pan, and never again
worry about cold starts. Wolverine puts heat where it counts -- IN THE
OIL -- for improved crankability in the most frigid weather. For many
applications, this type of heater is the only practical choice.
Unlike block, dip-stick or other types of engine heaters, these heaters
evenly spreads heat throughout the engine from the bottom up, heating
the oil to near operating temperature. |
| Pricing Direct from SEABOARD
Marine to your door !! |
| MODEL |
WATTS |
DIMENSIONS |
OIL PAN CAPACITY |
Price Including
Shipping & Handling ** |
| 9.0 |
125 |
3 in. dia.
(round pad) |
3-6 U.S. Qts.
(2.85 - 5.7 Liters) |
$65.00 |
| 9.1 |
125 |
1.5 in. x 6.0 in. |
3-6 U.S. Qts.
(2.85 - 5.7 Liters) |
$65.00 |
| 16 |
250 |
4 in. x 3.5 in. |
5-13 U.S. Qts.
(4.7 - 12.3 Liters) |
$75.00 |
| 40 |
500 |
5 in. x 7 in. |
13 - 27 U.S. Qts.
(12.3 - 25.5 Liters) |
$85.00 |
| 80 |
1,000 |
6 in. x 11.75 in. |
26 -48 U.S. Qts.
(24.6 - 45.4 Liters) |
$110.00 |
| IPH-500 * |
500 |
10.75 in. x .75 dia.
In-Pan-Heater |
26 - 48 U.S. Qts.
(24.6 - 45.4 Liters) |
$130.00 |
|
** Includes shipping, UPS ground,
to your door / 48 states. On (4) or more units, subtract 10% from the
total.
Visa or M/C accepted - Order by FAX, e-mail or by phone. |
| WHAT IS IT? |
| A revolutionary new kind of Engine
Preheater designed to heat the important areas of the engine beginning
with its oil supply. Remember -- Heat Rises. |
| WHAT DOES IT LOOK
LIKE? |
| A thin, flexible, very durable silicone
mat/pad built to conform to the bottom of an oil pan. |
| HOW IS IT INSTALLED? |
| It is bonded with a silicone adhesive
to the bottom outside surface of an engine's oil pan. |
| HOW DOES IT WORK? |
| Heat generated is transferred into
the oil pan structure to provide a thorough, gentle, even Heating
of the oil supply. The heat then rises to warm important internal
engine components. Seaboard calls this "soft heat." |
| WHAT DOES IT DO
FOR AN ENGINE? |
- IMPROVES crankability in
the coldest weather, and reduces white smoke.
- REDUCES cold start-up wear.
- REDUCES water and acid accumulation in the oil supply. |
| WHY IS NO MAINTENANCE
REQUIRED? |
| Wolverine Heaters do not suffer
the costly element failure common to immersion type heaters. |
| HOW DOES IT SAVE
ME MONEY? |
| The Wolverine SAVES MONEY by increasing
engine life. It is maintenance free. Wolverine Heaters offer superior
preheating at reduced electrical cost. |
|
| THE
WOLVERINE ADVANTAGE: |
 |
| ·
Provides immediate lubrication |
| ·
Virtually eliminates cold-start wear |
| ·
Fast, easy and inexpensive installation- new peel-N-stick |
| ·
Uses in military and government applications |
| ·
Improves crankability at the coldest extremes |
| ·
Heats internal components more thoroughly than other heaters |
| ·
Exclusive three-year limited warranty protects your investment |
|
 |
 |
|
|
|
 |
|
 |
|
| For more information on marine products offered by Seaboard Marine contact: tony@SBMar.com |
|
|
